PowerTap P2 Pedals

$899.00

Power meter pedals. Easily swap between bikes.

In the box:

  • One set of PowerTap P2 power pedals
  • Pair of red 6-degree float cleats
  • Pair of AAA lithium batteries

SKU: 00.6715.008.000 Category: Tag:

Description

At the time PowerTap P1 Pedals were released, they were the most sophisticated pedal power meter on the market. And now the bar has been raised yet again.

To create the PowerTap P2 Pedals, the simple, yet innovative, “plug-and-play” pedal-based power meter was updated to be sleeker, lighter and 20% more battery life. The P2 Pedals add only 398 grams to your rig, all while showing off a distinct, silver pedal body complete with a lower claw height for increased shoe-to-cleat compatibility.

Additional information

Weight

398g (per set of pedals with batteries)

Battery

AAA Lithium – use only lithium batteries with the P2 pedals. Alkaline batteries could damage the pedals, and damage caused by batteries is not covered under warranty.

Thread Type

9/16"

Cleat Interface

3-bolt

Spring Type

Adjustable Elastomer (*Adjust the spring force tension for optimal retention and safe release. Ensure pedal and claw area are free of dirt, debris and clothing obstructions.)

Stack Height

14mm

Wireless Technology

ANT+, Bluetooth low energy technology

More Specs

  • Cleat: PowerTap Cleats, available in 6-degree or 0-degree float
  • Release Tension: 6-20 Nm
  • Center of Pedal: 53mm (measured from crank to pedal)
  • Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank)
  • Firmware Updates: Over the Air
  • Battery Life: 80 hours
  • No rider weight limit

User Manuals

PowerTap All current user manuals for PowerTap products can be found here.

Service/Maintenance

PowerTap Service Options and Pricing

Typical in house service time is 3-5 days – for USA and Canada. To setup, receive directions for Global services, or to further discuss, any of the below PowerTap Services. Please contact Quarq Customer Service.

 

PEDALS:

Bearing Service – $175 + return shipping (pricing is for a set of pedals; applicable to P1s, P1 and P2 pedals); Includes:

  • All bearings, spacers, and seals replaced
  • New spindles (includes left and right for P1S, P1 and P2 pedals)
  • New V3 battery caps, AAA lithium batteries, and pedal washers
  • New pedal body endcaps
  • Basic electronics check
  • Firmware Update

 

Overhaul Service – $300 + return shipping (pricing is per set of pedals; applicable to P1s, P1 and P2 pedals); Includes:

  • All bearings, spacers, and seals replaced
  • New spindles (includes left and right for P1S, P1 and P2 pedals)
  • New cleat retention claws
  • New set of cleats, offered in 6 deg or 0 deg float
  • Cleats offered in 6 deg or 0 deg float
  • New battery caps, AAA lithium batteries, and pedal washers
  • New pedal body endcaps.
  • Full Electronic Diagnostic and Factory Calibration
  • Firmware Update